SAMES KREMLIN | A35 HPA Automatic Airspray Spray Gun

Description

Answers to high production Airspray rates
Designed for high viscosity material
Modular design & high reliability

► Technical manual

Performance

Index knob adjustments of fluid output allows for precise output accuracy
Fan width control delivers a high quality finish & fan pattern optimization
Precise machining of aircap delivers rigid fan control

Productivity

Reduced overspray delivers fast ROI (Return on Investment) & material savings
A 0-90° indexed aircap enables easy & fast re-adjustment of fan pattern
Easy assembly reduces downtime
Side output for easy mounting on automatic systems
Rear output for easy set-up in robotic applications
Circulation only in base in order to reduce pressure loss in the circulating system

Sustainability

Guaranteed needle sealing by self-adjusting cartridge
Hard treated needle & wetted parts in stainless steel or treated stainless steel for increased lifetime
Reduced overspray decreases spray booth maintenance
Brass nickel plated aircap ensures high resistance to water-based materials

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	6 (87)	bar (psi)
Maximum Fluid Outlet	400 (14)	cc/min (oz/min)
Minimum Fluid Outlet	150 (5.3)	cc/min (oz/min)
Maximum Air Pressure	6 (87)	bar (psi)
Recommended Atomization Air Pressure	4 (58)	bar (psi)
Air Consumption	33 (19.4)	m3/h (cfm)
Weight	497 (17.5)	g (oz)
Trigger Air Pressure	3 (44)	bar (psi)
Maximum Fluid Temperature	50 (122)	°C (°F)
PH	5-8
Std & Treated Stainless Steel Wetted Parts	♦
Aluminum Body	♦
Power Supply on Gun Base (non-fitted supplied fitting)	♦
Fluid Inlet	F 1/4" NPS
Pilot Air Inlet	F 1/8" NPS
Atomizing Air Inlet	F 1/4" NPS
Pilot Air with Quick Fittings	♦

Technologies

Airspray HPA™

HPA is an Airspray technology offering high power atomization.

Documents

Select all documents

Leaflet A35 Automatic Airspray Spray Gun (English version) SAMES KREMLIN

Format : application/pdf
Size : 421Ko

Select the document

Catalog airspray range sames kremlin

Format : application/pdf
Size : 6Mo

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.